Great fit, works as advertised.
This pulley is well made.The through hole is accurate, the threads for the set screw are good and the screw works nicely, the pulley turns true on the shaft, fit and finish are great although there are a few mold lines that could easily be removed.
Had just purchased a belt locally (for a whole lot more) and had it installed (wrong) resulting in me needing another one.Located this online at almost 1/2 the cost of buying locally and had it in a few days.Works great, will re-order in the future should I need any more mower parts!
Some belts that say they will fit MTD single stage snowthrowers don't fit right. This one does and at half the price!
GrillMark BBQ-467569 "KEANALL" Grill Brush
Precision Products 75 lbs. semi-comm. broadcast spreader. I purchased one. TBS40000PRCGY Model is to small to pull behind garden tractor, the wheel base is to short and will upset,so use the cover. fifty lbs. of pellet lime or ferizler will fill the one i received. not 75lbs. I ended up putting a 41 lb. suitcase weight across the front tubes this made it hold to the ground and not upset with load and the drive wheel will not slide. Handle adjustment is the bright spot of this spreader, sets easy from mower or tractor seat. This spreader will not work even in small yard unless you can put weights on it ,and the pipe tubes may not stand this very long. Buddyb
Obviously, the great thing about these belts are the price... it stops there.I installed this belt on my riding mower and probably got 5 uses out of it... my original belt that came on the mower lasted over 5years.So to wrap it up, it is very hard to change these belts and you can risk injury, do it as little as possible by buying an OEM original belt that lasts a long time.
This 15" electric trimmer is the first I've ever owned so I have nothing to compare it to, except an old pair of rusty hedge clippers! However, that being said, my first experience with the trimmer was excellent.
This ignition was just what I needed for my Yardman Mower.It got me up and running quick in the middle of the summer when I needed it.
The blades were not star hole as stated.They did work, good thing my man is a mechanical guy.The service was lighting fast.
This is certainly the correct one for the lawn mower! If your mower requires this spark plug, buy it. Of course, there may be some other kinds of motorized vehicles that require a spark plug like this. Just refer to the product specifications section in your owner's manual, and before you know it, you will be on your way to buying the proper auto part. As long as the word Champion is on the package, it should be the right spark plug for you.
This is exactly the part I needed to get my trusty old mower back in action. Great price, quick delivery. Thanks so much Amazon!
I have used this sprayer and it does a great job. I am very satisfied with the coverage. I would not hesitate buying another one. Really a good sprayer.
I have two golf carts and two Toro zero-turn lawn cutters. These tires happen to fit them all! My regular tires were slipping because I have a lot of slopes to deal with. With these tires, I don't worry about slippage. Use them on the rear tires only, since they are the ones connected to the transmission (or motor).
Great price and amazom prime saves money.I could not find a better price locally or online.
I purchased this part and NO WHERE in the auction does it say that it is a tube, not a complete wheel.What a joke, maybe someone at Deerso will learn how to read and/or write to correct this.
Very Happy with CUB CADET/918-3129A Spindle Assembly
I just purchased this today.Our store had both this item and the 51591 super blower - I think this is simply the newer model.(And I paid slightly less than this price at our neighborhood store so check around)
Works well and was shipped timely.The Weed Eater Trimmer is heavy and it comes with a shoulder strap to support it.Very pleased with product and service.
I ordered these parts on April 21 and lo and behold, they were at my door on the morning of April 23!
Actual Briggs and Stratton part, not a generic replacement.Easy to install gear on flywheel once you get the flywheel off.Did not use starter gear as I bought a new starter at the same time.
glad I put new belts before the nieces and nephews came for vacation,had no idea that lawn tractor would be used as a go cart,hay ride puller,etc..I think it was the highlight of their vacation Lol
I bought this for myself and I found it to be a comfortable weight.I especially like the safety features.It makes nice clean cuts and the length of of blade covers more area and the job gets done quicker.I would definately recommend this product to others.I also took advantage of the free shipping.
I ordered this, but there is NO prefilter.
The Worx WG112 is a great little trimmer ... for a small area, anyway. I have a small yard and need to trim around 3 flower beds / garden areas and around my steps. This trimmer is perfect for that small area. No gas engine, so it's very quiet. And it's cheap! I couldn't find replacement line spools for it at amazon, but Sears has them for less than $5. So, if you have a small area to keep trimmed, get the WG112.
I used this product as part of a pedal-a-watt display with a light panel at a regional renewable energy fair and it was the hit of the fair. The pulley is well-made and works well with the Grizzly V-belt (Grizzly H9816 Power Twist® V-Belt, 3/8" x 5'). I highly recommend it for the pedal-a-watt set up.
This is the weed wacking string I needed.Home Depot didn't stock it, and since it was for the WORX weed wacker, I figured I wouldn't be able to find any that thin.So, I ordered through AMAZON.Fortunately or unfortunately, I found this string at Wal Mart.Wal Mart charged a little less for the product, but I ended up paying an awful lot more because of S&H.
AS A LANDSCAPER I OWN 2 OF THESE AND WE USE THEM HARD. IT IS NOT A COMMERCIAL TRIMMER, BUT ITS AS CLOSE AS YOU CAN GET. FOR THE MONEY YOU CANT FIND ANOTHER TRIMMER LIKE THIS ONE. I GOT MY LAST ONE THROUH AMAZON, ON SALE FOR 120 DOLLARS AND SHOULD HAVE PURCHASED MORE OF THEM AT THAT TIME. BY THE WAY THIS IS THE SAME TRIMMER AS THE POULAN 22 INCH, 25CC...FOR ABOUT 30-50 DOLLARS LESS. BOTH ARE MADE AND OWNED BY THE SAME COMPANY.
After getting the wrong item shipped to me and finally getting the correct item the wheel seems to be fine.The only negative is it is a bit heavy.
I recently purchased this weed sprayer and found it quite easy to use. Assembly was quick and easy. The 12v cable is easy to string over to your garden tractor battery and the inline switch is located where you need it. The 6" wide cap on the tank is to use and allows trouble-free filling with glyphosate and water. The sprayer nozzles are also easy to adjust for wider or narrower spraying situations. My neighbors have come over to examine this trailer sprayer and impressed with it.
The belt is a great replacement for the Craftsman 174883, and a helluva lot less expensive! Does the job just fine. Seems a bit thicker than the original, but it's hard to tell for certain since the original is well-worn. But the belt fits the pulleys just fine.
The spindle fit perfect, but the blades didnt fit the spindles. Send a e-mail to Damlow and they sended me back that they should work. They dont! The blades I got were #95-005 that fit a craftsman not a MTD. I should have recevied a #98-059 to work with my mower. Will I deal with Damlow again, I dont think so.
For safety concerns just use the source tank valve for on/off control...To fill each 1 lb. bottle more completely simply put those containers in a refrigerator or even a freezer for a few minutes AND put the 20/40 lb. FULL tank in hot water and/or in the Sun...The key here is to maximize the pressure in the source tank and minimize it in the receiving 1 lb. bottle allowing for more propane to transfer before the pressure equalizes...I've been filling these little bottles for years using this type coupler and while they may not get 100% filled as when new they can reach 80-90% with regularity when the above steps are taken...Keep in mind NO Propane tank is completely filled anyway or at least it shouldn't be to allow for excessive heat expansion when full..
Not a lot to say about an air filter for a lawn tractor other than I paid just about the same as I would have locally and it was delivered to my door in two days.
Was shipped promptly.Is the correct part.This thing really filters air very well.Air goes right through it, leaving dirt and dust behind in the filter.Great job!
Excellent fit for a replacement bag; very sturdy material; arrived promptly. Thanks for revitalizing my lawn mower (and my lawn!).
These are the same plugs you can buy at any auto supply store. However, they were less expensive than any store near me and they were delivered to my door, worth the short wait!
I've been using this product on my 23 year old Toro mower for years.It still starts on the first or second gentle pull.This product preserves the gas, keeps things clean and virtually assures a good start.The local store where I bought it for years closed and I couldn't find it in any of the other stores here.I doubt that the Stable brand they sell will do the same thing.The place I ordered from Amazon gave excellent service and it arrived in a few days.Use this product at the maintenance recommendation all the time.I believe that at the end of the season running the gas through with it helps keep it clean and ready for the next season.
If you suspect you have a bad primer bulb or leaking fuel lines, this kit works well.To install the kit, remove air filter housing and carburetor. Make a drawing of where fuel lines go -- it is not intuitive once everything is disassembled. (I read suggestions from people that said to use a certain size wire to pull new fuel lines through the tight-fit holes in the fuel tank, but could not get this to work.) The fuel lines in the kit are split just right at one end to make the job easier, so I came up with this procedure: Cut old fuel lines off as close to tank as possible, push what remains into the EMPTY fuel tank. Remove fuel cap and shake out the remaining fuel line and filter. Do the same for the return line. Feed 20-gauge electric wire through one of the fuel line holes and out the refuel opening. Tightly tie thin string (kite string works) to the wire, then pull it back through the small hole in the fuel tank. Now, make a tight knot with the other end of the string close to the end of the split fuel line, and pull the new fuel line through the tank and out the small hole. Do both lines -- one is for fuel return. Carefully pull out the new fuel line until the opposite end is well into the tank. (The return line does not need much line inside the tank, as you will see when you remove the old fuel line.) Remember to add the fuel filter and return line end before the fuel line disappears into the fuel tank. Finish by reassembling with the new primer bulb. If the primer bulb pumps fuel from fuel tank and holds it, you did a great job. If it does not work, try reversing fuel lines -- it is easy to get them mixed up. The kit has all the parts for replacing fuel lines, primer bulb and fuel filter. If bad fuel lines and/or primer bulb is the problem with your blower or trimmer, this kit will fix it.Note:It can be tough to get the carburetor, air cleaner housing, fuel lines, and throttle cable all correctly aligned at the same time when reassembling.Be sure that fuel lines are not pinched between carburetor and engine.
This blower works well although it does not work for a long time on one charge.Otherwise a nice product.
The universal mount kit took quite awhile to mount on my Honda Rancher.The actual dump bucket only took minutes to put together and mount on the machine.
Received the part in a timely manner. Part was exactly as advertised and fit my mower. Good service!!
Very Nice Replacement part, just like the one I took off.Worked and fitted just right.
The Toro Side Discharge replacement grass bag is almost as good as the original.Material-wise there is no noticable difference.The only thing that kept me from giving it 5 stars is the fact that the replacement bag zipper closure is installed so that it operates in the opposite direction from the original.On the original, the zipper pull tab is near the support arm loop when closed thus allowing you to hold both the metal handle of the bag head and support arm loop in one hand while unzipping with the other.Because the replacement bag zipper operates in the other direction, emptying the bag is a bit more awkward.
This belt does not properly replace OEM part number 754-0101A for an MTD single stage snow thrower.
After purchasing this product as recommended by the MTD manufacturer's website we discovered first that none of the accompanying hardware was included in the packaging. After having located and acquiring the hardware at a local lawn mower repair shop, we determined the grass catcher could not be mounted on the lawn mower the manner is which the directions indicated. I had to take the lawn mower, grass catcher and hardware back to the local lawn mower repair shop who recommended mounting the hardware a completely different way than the instructions, which included having to drill new holes in the lawn mower deck. A really poor product, with a set of instructions that were totally off base.
The blade is well designed. It is easy to attach and detach. I have a 350 cc ATV and the blade works well with that size ATV, but will work better with a larger machine.
I read all the other reviews about how hard this was to put together. I had no such problem. Anyone with just a little common sense and a little mechanical ability should have it put together in about 5 minutes. I consider it a nice product for the price.
I bought two put one on Honda generator the other on wood splitter. On the generator it alows me to keep track of how long I can run on tank of gas and how much time I put on generator while camping so I know when to change oil. It was really suprising the hours put on during my 8 day trip, 40 hours need to change oil at 50 per manual. easy to install one wire to ground other wire wrap around spark plug wire
The bag that I ordered was not as advertised - it did not fit on my Snapper mower -and when I returned it, they never credited me with what I paid. So I have no bag and no refund.
